How To Setup Canon Imageclass Mf644CDW?

How To Setup Canon Imageclass Mf644CDW

If you have got a new Canon Printer, but you have queries on How To Setup Canon Imageclass Mf644CDW, then follow the simple steps below:

Components On Protect Package

  • Step 1: Canon imageCLASS MF644CDW Printer
  • Step 2: Starter Toner Cartridge
  • Step 3: Power Cord
  • Step 4: Telephone Cable
  • Step 5: Starter Guide
  • Step 6: Software DVD-ROM
  • Step 7: Warranty Card

Setup Canon Imageclass MF644CDW Printer.

  • Step 1: Unpack Canon Imageclass MF644CDW and take it out along with its accessories.
  • Step 2: Place the printer on a table and gently remove all the tapes and packing material surrounding the printer.
  • Step 3: Also, remove the tapes on the scanner glass.
  • Step 4: Now, pull out the paper drawer from the Canon MF644CDW. It is located on the front side of the printer.
  • Step 5: Slide the paper edge guides to the extreme so that you have enough space to load paper.
  • Step 6: Take a stack of paper, fan it well, and then place the paper in the paper drawer.
  • Step 7: Again, adjust the edge guides to the edges of the loaded paper.
  • Step 8: Push the paper drawer into the printer.
  • Step 9: Take the power cord you received with the printer. Connect one end of the power cord to the printer and plug the other end into an electrical outlet.
  • Step 10: Now, Turn ON the power supply and press the Power Button on the printer.
  • Step 11: Configure Canon Imageclass MF644CDW Settings such as language, country/region, time zone, and current date/time.
  • Step 12: After configuring these settings, you will see a message to select the connection method. Choose Yes if you wish to Connect Canon Imageclass MF644CDW to Wireless LAN. If you wish to connect the printer using Wired LAN or USB, choose No.
  • Step 13: If you choose Yes, then make sure the printer is near to your wireless router and configure the wireless settings on the printer using the prompts displayed.
  • Step 14: Once the printer gets connected to wireless LAN, configure the Toner replenishment service settings on the printer. If this is not required, you can select Do Not Accept.
  • Step 15: Finally, install the printer software on your computer using the software DVD-ROM that you received and complete the printer setup.

For remote assistance on How To Setup Canon Imageclass MF644CDW, contact our support team.