How to Install Epson Printer

The guided instructions given below will direct you to install the Epson Printer on your Windows or Mac system.

Step 1: Before you begin the Epson printer’s software installed on your system, make sure that you have done the hardware setup.
Step 2: If you are going to set up the Epson printer for the first time, then make sure to remove all the packing materials from it.
Step 3: After removing all the packing materials, insert the ink cartridges into the printer.
Step 4: If your Epson printer has an ecotank, then you have to fill the ink tank manually.
Step 5: Open the ink tank cover of your Epson printer.
Step 6: Remove the cap from the ink bottle.
Step 7: Insert the ink bottle into the tank.
Step 8: Once the tank is filled with enough ink, close the tank.
Step 9: When prompted, load a stack of A4 paper in the paper tray.
Step 10: Make sure to adjust the paper tray to avoid paper jams.
Step 11: After completing the basic printer setup, switch on the Epson printer.
Step 12: As soon as you turn ON your Epson printer, set the preferences as instructed on the printer’s screen.
Step 13: Most of the Epson printer support Wired, Wireless, or USB connection types.
Step 14: Based on your Epson printer, select the correct connection type during the Epson printer driver installation.
Step 15: You can use the installation CD or downloaded driver file to begin the driver installation on your system.
Step 16: Perform the driver installation by following the instructions displayed on the install wizard.
Step 17: After completing the Epson printer driver installation on your system, try to perform a test print, copy, scan, or fax operation.
Step 18: To get remote assistance in installing your Epson printer driver on your Windows or Mac system, click the Call button available on this screen.