Epson Workforce Wf-3820 Install

Epson Workforce Wf-3820 Install

Epson Workforce WF-3820 is an All-in-One printer. It provides precise and professional-quality prints at fast speeds. 

It offers many user-friendly features. To set up the Epson Workforce WF-3820 printer for the first time, perform the following detailed steps.

Unpack your Epson printer

  • Take the Epson Workforce WF-3820 printer out of the box.
  • Ensure that all the necessary accessories are included in the printer box.
  • Clear all the protective materials from the outside of the printer.
  • Raise the printer’s scanner unit.
  • Remove the packing materials from the inside of the printer.
  • Lower the printer’s scanner unit properly.

Turn on your Epson printer

  • Take the power cord and plug its one end to the printer’s rear port.
  • Connect the power card’s other end to an electrical outlet.
  • Lift the control panel.
  • Press the Power button.
  • On the printer’s control panel, select your desired language.
  • Set your country, date, and time.
  • Note: You can even change these settings later.

Install the ink cartridges

  • Raise the printer’s scanner unit.
  • Before you unpack the ink cartridges, shake it gently few times.
  • Peel off the yellow tape from the ink cartridge.
  • Place and press the ink cartridge in its holder.
  • Repeat the same to install the remaining ink cartridges.
  • Close the printer’s scanner unit and perform the LCD panel instructions to charge the ink.
  • To specify your paper settings, follow the display panel instructions.

Load paper

  • Lower the printer’s control panel.
  • Open the output tray and then remove the paper cassette from the printer.
  • Move the side edge guides in the outward direction.
  • Insert some paper in the paper cassette. Note: The glossy or printable side must face down.
  • Align the side edge guides according to the paper dimension.
  • Place the paper cassette in the printer.
  • Lower the output tray and pull out its extension.

Fax setup

  • Use a phone cord to connect the printer’s LINE port and a telephone wall jack.
  • Select the Proceed option to perform the fax setup.
  • If you wish to set up the fax later, select the Set Up Later option.

Install the Epson printer software

  • Insert the printer installation CD into your computer’s CD drive.
  • Note: If the computer does not have the CD drive download the printer software from the manufacturer website.
  • Run the driver installer. Once the installation wizard starts, perform the instructions on the screen.
  • When the Select Your Connection screen appears, choose Wireless connection, Direct USB connection, or Wired network connection.
  • Continue with the prompts to complete the software installation.
  • Now, you can access the Epson WF-3820 printer from your computer.