Epson Workforce Pro WF-7840 Installation Settings

Epson Workforce Pro WF-7840 Installation Settings

Epson WorkForce Pro WF-7840 is an All-in-One printer with an ADF, double 250-sheet paper trays, and touchscreen control panel. This printer also supports wireless printing and so you can connect to the printer from any wireless device. If you are installing the Epson WF-7840 printer for the first time, follow the quick steps given below to get Epson workforce pro WF-7840 installation settings.

  • Step 1: Firstly, unpack the printer and take out the printer supplies such as power cord, CD-ROM, and ink cartridges.
  • Step 2: Next, remove the protective tapes from both inside and outside of the printer.
  • Step 3: Connect your printer to a wall outlet using the supplied power cord.
  • Step 4: Raise the printer’s control panel and press the Power button to turn on the printer.
  • Step 5: Lift/open the scanner unit and do not touch the flat white cable.
  • Step 6: Gently shake the ink cartridges and open them from the package.
  • Step 7: Remove the yellow tape from the cartridges and recycle them.
  • Step 8: Install all the ink cartridges into the ink holder and lower the scanner unit.
  • Step 9: Once you have lowered the scanner unit, the ink charging process will start automatically.
  • Step 10: Wait until the ink charging process is completed while process the Epson workforce pro WF-7840 installation settings.
  • Step 11: After completing the ink charging, pull out the paper cassette from the printer and slide the paper width guides outward.
  • Step 12: Load a stack of legal plain paper into the paper cassette after fanning them.
  • Step 13: Slide the paper width guides to adjust the paper loaded in the paper cassette.
  • Step 14: Push the paper cassette into the printer and choose the required paper settings on the LCD screen.
  • Step 15: If you wish to add the fax function, connect a telephone line cord to the printer’s LINE port and tap Proceed on the LCD screen.
  • Step 16: Otherwise, tap Close to set up the fax function later.
  • Step 17: Install the printer software on your computer using the supplied CD-ROM.
  • Step 18: Agree to the EULA and install the required software by selecting them in the installation wizard.
  • Step 19: Choose any one of the following options as your connection type.
  • Step 20: Wireless connection
  • Step 21: Direct USB connection
  • Step 22: Wired network connection
  • Step 23: Based on the selected connection type, establish the connection between your printer and computer by following the on-screen prompts.
  • Step 24: Finally, verify the printer functionality by printing a test page.
  • Step 25: Now, the Epson workforce pro WF-7840 installation settings are successfully completed.