Brother Printer Not Connected Mac

Brother Printer Not Connected Mac

If you can’t connect a Brother printer to your Mac device, proceed with the steps that are given below to fix the Brother Printer Not Connected Mac issue.

  • Step 1:If you have connected the printer over a network, print the Network configuration sheet to check the network settings.
  • Step 2:From your Mac device, go to HDD and open Applications.
  • Step 3:Select the Network Utility option and click on the Ping button.
  • Step 4:Enter the IP address of the Brother printer in the correct section.
  • Step 5:Click the Send Only_Pings option and change the value to 4.
  • Step 6:Now, again click on the Ping button. 
  • Step 7:If the printer doesn’t respond, then perform the initial setup on the printer to connect it to the network.
  • Step 8:If the Brother printer responds, you can follow the troubleshooting steps.
  • Step 9:Verify whether the printer is turned on and not in sleep mode.
  • Step 10:If the LCD screen of the printer is blank, check whether the power cable is connected properly.
  • Step 11:Replace the power cable if it has gone defective.
  • Step 12:Check whether there are any error messages on the printer screen.
  • Step 13:If you find any error messages like paper jams, or ink/toner empty, continue to resolve the issue by following the instructions on the screen.
  • Step 14:Select the System Preferences option from the Apple icon.
  • Step 15:You can also select System Preference from the Dock.
  • Step 16:Click the Hardware option and select Print & Fax.
  • Step 17:If you do not find your printer in the displayed list, install the printer software on your Mac device.
  • Step 18:Go to the official Brother website to download the driver of the printer.
  • Step 19:You can select your printer model and choose the required driver.
  • Step 20:Once you have installed the driver, go to the Print & Fax section.
  • Step 21:Select the Default printer option and set your Brother printer as the default printer.
  • Step 22:Check the Printer status and change it to Resume Printer if it is paused.
  • Step 23:Print a test page, and the Brother Printer Not Connected Mac issue will be resolved.